How can hotel lamps and lanterns of crystalline light cleaning

Hotel crystal lamps and lanterns is striking soft outfit, so the cleaning of lamps and lanterns is vital, it can be seen that a hotel comfort and crystalline light can bring room because of its elegant and fashionable breath, and be loved by numerous consumer choose and buy. Although nowadays, more types, more style of lamp act the role ofing has stepped into the market, looking like a crystal lamp to compete the cause. Way to clean the crystal lamp is more and more get the attention of the masses of users. Crystalline light cleaning precautions: do not rotate the light body: when clean lamps and lanterns, don't rotate the light body, so as not to loose teeth, no safety accident. Check link parts: should check the link of lamp body firmly at the same time, found that the screw loose to conveniently tighten and sliding tooth dangerous spiral of the should be replaced immediately, to ensure safety. Two, keep the bead string flat: clean strings ( Especially the upper and lower Seine part) Beads found distorted ( With spring button round or oval, easy to appear the phenomenon) Should be adjusted to flatten effect; If it is to use flat hook & throughout; Series, pay attention to the same button on the front of the outwards, looking inward, to beautiful, unified. Here are two ways of cleaning crystal lamp: 1. Kerosene if you home opportunely kerosene and discard the old toothbrush, use this two things to deal with the most suitable crystal surface stubborn dirt. Before cleaning, you must carefully put the crystal tear open come down to one by one, then dip it into the kerosene, then gently dry crystal surface with a toothbrush, soften dirt on the surface of the slowly, can use the detergent scrub crystal block. 2. Special spray cleaner if you feel one crystal ball too hard, also can choose to buy a professional cleaner, such as long as you the crystal lamp spray cleaner, a crystal ball or crystal piece of fly ash will be taken away by the volatilization of liquid. Summarized as follows: cleaning of crystalline light step 1, the construction of the workbench: if there is no oil pressure type automatic elevator, to build simple and easy, safe can degrade the work platform, platform height to people standing up for ace can touch the lamp body top shall prevail. 2, crystal beads, wipe: wipe bead, must have a soft cloth with diluted detergent water, gently wipe (at the same time in the crystal beads are back When wiping cannot hold down, in order to avoid breaking strings) 。 3, keep the balance of the lamp body: if you want to clean all the strings removed, large lamps and lanterns to note down the strings of the balance of the lamp body, don't hurt the side down again on the other side and cause the lamp body tilt, lead to the lamp body or frame deformation; Should be around before and after the match the disassembly. Stent accessories: wiping wiping the stents, accessories, soft cloth don't touch water can't touch alcohol water, in particular, in order to prevent chafing plating protective film outside influence the surface of the lamp shine effect. 4, pay attention to safety operation: wipe the lamp, to cut off the power supply; Light bulbs will unload wipe clean again after installed; Bulb precession moderation, too loose will produce poor contact; Too tight may turn bad light bulb. 5, timely replacement parts: buckle rust color beads of connection, not beautiful, two brittle crack, best exchange, by the way; Beads found defects, should be timely completion.