New Chinese style droplight sitting room how to install?

New Chinese style is relative to a style, Chinese style droplight as a larger light source in our home, we must pay attention to household style when choosing matching, and the author would see below new Chinese style in the process of installation droplight sitting room what are the steps: 1, bit installation: installed, corresponds to select electric drill, and then to install the bit. It is important to note top hole usually play 6 mm, avoid by all means to choose suitable drill size during installation. 2, looking for particular of sucker punch position, with straightedge how wide is: under the hangs Taiwan first cut down from the particular of absorption, targeting the spiral screw suction a top. It is important to note that if you find a hole location hasn't been on, remember to adjust the position of the screw. 3, drilling: where the need to install the droplight, marked with a marker pen, and then to drilling. Note the drilling time must pay attention to the depth of the punch. 4, expansion screws, using hand screw press the plug into the hole, then use tools in hammer. 5, fixed hangs Taiwan: make sure have all the anchors knock into the wall, and then to fixed hangs Taiwan. 6, solid suck in particular and droplight: use the screw hangs Taiwan, in particular two permeate each other up and tighten the screws, solid again sucked in particular. 7, the lamps and lanterns of the flexible clasp on the chain hoist on the suction in particular, to adjust the size of the right, then install the lamp shade, try to electricity. We all his life, to do the common things good we, with the same spirit of craftsmen opened new journey - - - - - Zhongshan lamp is acted the role of custom manufacturers